Dry powder ball press machine

Capacity：1～5t/h......

Introduction：The line pressure ratio of the dry powder ball press can reach 8-11t/cm, without the need to add a binder, the material can be directly pressed into a shape, an.....

Product Description

The line pressure ratio of the dry powder ball press can reach 8-11t/cm, without the need to add a binder, the material can be directly pressed into a shape, and it is used in the smelting of non-ferrous metals such as magnesium and the production of quicklime pellets.

Product Advantage

1. Wide range of applications:

Dry powder ball press machine mainly presses quicklime powder, magnesium oxide powder, copper concentrate powder, chrome ore powder, lead-zinc waste, aluminum ash, non-ferrous metal powder, refractory, ceramic material, etc. It is widely used in metallurgy, chemical industry, refractory and other industries .

2. High economic benefits :

Active metal smelting problems and waste recycling turn waste into treasure, which have a very promising market prospect.

3. Abundant supporting equipment:

The complete dry powder ball press equipment supporting products provide one-stop solutions.

4. Worry-free service throughout:

The equipment is easy to maintain and has little loss. You can contact us at any time when you encounter technical problems during use, and promise to provide 24-hour all-round technical support to solve your worries.

Product Parameter

Model performance	WLGF-0.5	WLGF-1.0	WLGF-1.5	WLGF-2.0	WLGF-2.5	WLGF-3.0	WLGF-5.0
Work efficiency	0.5T/h	1.0T / h	1.5T/h	2.0T / h	2.5T/h	3.0T / h	5.0T / h
Roll diameter (mm)	∅299	∅367	∅367	∅399.5	∅480	∅522	∅700
Roll width (mm)	110	183	183	232	196	196	225
power	18.5kw	37kw	45kw	45kw	55kw	55kw	75kw
reducer	ZQ650	ZQ850	ZQ85	ZQ850	ZQ1000	ZQ1250	ZQ1450
Roll material	9CY2Mn	9CY2Mn	9CY2Mn	9CY2Mn	9CY2Mn	9CY2Mn	9CY2Mn
Bearing model and quantity	7522 8 sets	2097730 4 sets	2097730 4 sets	20997730 4 sets	2097736 4 sets	2097744 4 sets	2097752 4 sets
Finished spherical shape	customize	customize	customize	customize	customize	customize	customize

Note: Technical parameters are subject to change without notice. For more detailed information, please contact us for free, thank you!

Working Principle

Structure principle

In the work engineering of dry powder ball press, the materials are pre-pressed and exhausted by a pre-pressing device to make the material more dense and compact, and then through the two pairs of rollers of the high-pressure ball press for strong extrusion, and the finished product is output by the belt conveyor. The roller skin is made of 65 manganese casting or alloy steel, which can be replaced after wear. The hydraulic protection device of the ball press can prevent the equipment from being damaged by the impact of hard objects:

Finished spherical

This machine can produce finished balls with special shapes such as square, ball and egg, round, goose, pillow and other special shapes. The specific shape can be defined by the user.